| Model 102 Model 112 Model 201 Model 300 Model 501 Model 606 Capri Concerto |
MC-606 Multi-Channel Amplifier
 JRDG MC606 Multichannel |
Flexibility. The ability to adapt. To be capable of fitting the need of a particular situation or demand. Introducing the Jeff Rowland Design Group MC-606 Multi-Channel Amplifier: An amplifier tailored to the needs of any of today's home entertainment systems. Six channels of JRDG-applied ICEPower® amplification provide 250 watts at 8 ohms and 500 watts at 4 ohms to the ultimate multi-channel audio or home-theatre system. The MC-606 is capable of adapting to any of today's audio and video system needs and reproducing sound in the manner of every Jeff Rowland Design Group amplifier before it: perfectly.
Utilizing a unique design topology that can selectively parallel six discreet inputs with a simple flick of a switch, the MC-6 can be configured to output two, three, four, five, or even six channels of audio reproduction, even bi- and tri-amplification, all without any disassembly or installation of inadequate "output cards." Balanced as well as unbalanced inputs offer compatibility with any source component. An artfully designed, structurally inert chassis houses audio circuitry as electronically advanced as it is unique.
The Jeff Rowland Design Group MC-606 is, quite frankly, the most flexible amplifier available
Specs |
||||
Output Power: |
Continuous RMS/channel @ 8 ohms - 250 watts @ 4 ohms - 500 watts |
Input Impedance: |
40k Ohms |
|
Frequency Response: |
5 Hz - 70kHz, 3dB |
Common Mode Rejection Ratio: |
>90dB, 20 Hz 20 kHz |
|
Peak Output Current |
> 35 amps |
Absolute Phase: |
Non-inverting, Pin 2 Positive |
|
Dynamic Range: |
117 dba |
Inputs: |
6 x Balanced XLR 6 x Unbalanced RCA |
|
Load Impedance Range: |
2 ohms - 16 ohms |
Outputs: |
6 pair binding posts |
|
THD + Noise: |
0.1W-500W/4 ohm <.05%, typically .006 @ 1kHz |
Power Consumption: |
Idle - 54 watts Maximum - 3900 watts |
|
CCIF Intermodulation Distortion, 19/20kHz: |
<.002% |
Amplifier Weight: |
97 LB |
|
Damping Factor @ 1 kHz: |
1000 |
Amplifier Dimensions: |
17.5" (W) x 22" (D) x 11.4" (H) |
|
Overall Gain: |
26 dB |
|||